Auto Air Conditioner Cooler for Hyundai Elantra

Auto Air Conditioner Cooler for Hyundai Elantra

                      Micro channel parallel circulation radiator professional company

The condenser-a ingredient of the air conditioning circuit-is integrated into the engine cooling module, the place it is employed to great down and condense the compressed, gaseous refrigerant from the compressor. We make brazed, flat tube condensers that supply high performance in spite of their compact and lightweight design. They make sure rapid cooling of the passenger compartment thanks to the best possible matching of heat transfer and force fall on equally the coolant and the air side.

The condenser is a warmth exchanger in a cellular A/C system. Nowadays, condensers are generally produced of aluminum, but in the past, some have been manufactured of copper/brass. Condensers search extremely significantly like radiators, just a minor thinner, and given that they also count on air flowing by way of them, are generally found in entrance of the radiator.
Like radiators and evaporators, condensers are also made as a series of tubes with fins all around them. its  job is to release warmth. Much more especially, to launch the heat the refrigerant absorbed although it was flowing through the evaporator, very significantly the same way the radiator releases the warmth from motor coolant that the coolant absorbed although it was flowing through the motor. The refrigerant enters the condenser as a substantial-strain vapor, but as it flows by means of the condenser and cools, it turns back again into a cooler large-stress liquid.

Item characteristics
1 adopt low height fins and multiple flat pipes to increase the heat dissipation area and improve the heat dissipation performance.
2 fin special treatment to enhance lodging resistance and maintain the tidiness of the products’ appearance 
3 powder coating on the products can enhance corrosion resistance and improve product life cycle.
4 none- argon arc welding solder products look different.
5 every product’s pressure is maintained by using nitrogen so the product is free from leakage at 100% before it leaves the factory

Firm Advantage
one. Generic products are supposed to be manufactured strictly according to the installation standard of the original factory, in this way to ensure the accurate installation for the users.
two. This special design for the pin not only enhances its lodging resistance,ensure the visual appearance tidy but also reduces the air blockage chance, it also allows more heat dissipation area to improve heat transfer performance. In that way, the air conditioning system can achieve its expected function more efficiently.
three. Part of the products uses galvanised microchannel flat tube as material or adopt the powder coating treatment, in order to improve products’ corrosion resistance and prolong the service life.
4. By machining core into different thickness and wave distance and changing the amount of holes in flat tube,we can improve the heat dissipation efficiency of condenser of the product, lower down the system compression power, save fuel and improve economic efficiency.
5.CZPTy product is double checked and a pressure-holding device is installed to ensure that every product is 100% leak-free before it leaves the factory.
six. The company with a complete production chain, is focused on the developing new products, and keeping tracking of products to ensure the timeliness of all product supply, and also enhance the flexibility of enterprise operation.
7.Only when we have an independent team with high efficiency can we satisfy CZPT demands.  

Lengthy expression business is dependent on our trustworthy companies, quickly respond and our skilled expertise to Car AC. We’ll become your companion, not just your supplier.
1.CAD Drawing, and mould style base on your sample
two.Mould check and sample verification just before mass production.
three.CZPTers of a variety of transport traces.
4.aggressive freight delivers and a single-stop provider on clearing, shipping concerns.

Q1. Are you a factory or investing firm? A: we’re a self -very own factory, we provide a single-end provider for our clients, from spare parts to condenser, from specialized revenue to transport and to following-product sales, so as to help save the cost for consumer, management the top quality and guide time, offer the greatest solutions
Q2: In which is your manufacturing unit located? How can I visit there? A: Our manufacturing facility is situated in  HangCZPT, Shan dong, China.
The closest airport is ZheJiang Yaoqiang airport or HangCZPT Liuting airport.
Q3. What is actually the generation time for new molds and mass creation? A: 7-10 times to construct the new moulds, mass production requires close to twenty-25days for 1 20gp,twenty five-30days for a single 40hq, can method urgently if need.
Q4: What is the payment conditions? A: Telegraphic Transfer (T/T) and Letter of Credit (L/C).
Q5: Can you ship me samples? A: Of course, Samples are for free, and freight is on your side.


Auto Air Conditioner Cooler for Hyundai Elantra



As one of leading leaf-chain manufacturers, suppliers and exporters of mechanical products, We offer leaf-chain and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.