Mining Feeder Conveyor Heat Wear Resistant Chute

Mining Feeder Conveyor Heat Wear Resistant Chute

Mininig crushing feeder wear lining wear components

ZheJiang Wodon Abrasion Resistant Use Plates for Alloy Steel Hardfacing Cco Bimetallic Claded plate

  • Chromium carbide composite cladding fusion bonded to a mild metal backing materials.
  • The deposit has been understood by means of oscillated welding and a dress in resistant coating used by submerged arc welding.
  • Fantastic cracks perpendicular to the welding bead is typical due to natural pressure relieving in a very tough matrix.
  • Really higher quantity of chromium carbides evenly distributed during the uniform thickness of the deposit.
  • Plate hardness ranges from HRC58-sixty five.
  • Appropriate for applications involving high abrasion and minimal to medium effect.

Supported by patent technique, Wodon substantial chromium carbide overlay put on plates are manufactured under tightly controlled parameters in a high quality management technique. A variety of thickness is CZPT.

Thickness(backing plate + weld overlay) L x W (mm)
four+4, 5+five one,four hundred x three,000
six+six, 8+5, 8+6, eight+eight one,four hundred x three,five hundred
ten+eight, ten+10, ten+twenty, twelve+12, 12+twenty, 14+26, 12+32… one,four hundred x 3,500        2,a hundred x three,500


Why our dress in plate has this kind of very good wear resistance?

1. The overlay chemical composition is the important

The primary substances of Wodon plates are C(%) :3.-5. and Cr(%):twenty five-forty five. This chemical proportion benefits in a big sum of Cr7C3 chrome carbide challenging
particles. The micro-hardness (up to HV1800) of these particles all through the layer will assure a tremendous put on resistant area.

Efficiency check:

Take a look at equipment: Quartz sand rubber wheel abrasion take a look at device.

Problems: Deciding on exact same dimension specimens for distinct resources and use plate producers, and put them under the exact same putting on working circumstances
in our tests gear.

Final results: The take a look at final results show that the existence span of Wodon use plate is two.5 times larger than domestic dress in plates and one.five occasions than imported types.

2. Chromium carbide microstructure

The dress in resistance of dress in plate depends primarily on the hardness, condition, size, quantity and distribution of the chromium carbide hard particles.

3. Bonding strength in between the overlay and base plate.

The overlay and foundation plate are extremely nicely bonding. The overlay will penetrate into foundation plate about .8mm-1.8mm, achieving up to 350Mpa in our exams.

Put on Part Generation


Overlay can be reduce with plasma, laser, and water jet.


The overlay area is not machinable. Nonetheless, Wodon can provide Overlay with countersink holes and tapped holes.


Overlay can be chilly shaped or rolled. 


Overlay can be welded on the delicate metal base plate surface.

Our creation ability of wear components is nine,000 tons for every year.

Firm Details

                                                                      Because 2004, Wodon has more than 300 personnel, four manufacturing bases

CZPTquarters: ZheJiang Wodon Use Resistant Material Co., Ltd, set up in ZheJiang

ZheJiang department plant: ZheJiang Wodon Wear Resistant Content Co., Ltd—Er wei Street Plant 

ZheJiang branch business: ZheJiang Wodon Put on Resistant Substance Co.,Ltd,  

ZheJiang branch business: ZheJiang Wodon New Materials Co.,Ltd,  


Creation Potential per yr:


               Wear plate: 200,000m2                      Flux cored welding wires: nine,000 tons                   Wearparts: 7,000 tons



Q: Are you trading company or maker?

A: We are ISO licensed flux cored welding wire and CCO dress in plate factory.

Q: Are you able to create CZPT chemical composition and dimension?

A: Of course, we could supply particular welding wire and put on plate in accordance to customers’ requirement.

Q: How long is your shipping time?

A: CZPTly it is five-10 times if the merchandise are in inventory. or it is fifteen-45 days if the items are not in stock, it is according to quantity.

Q: Do you provide samples ? is it totally free or added?

A: Yes, we could provide the sample for totally free demand.

Q: What are your conditions of payment?

A: Payment=1000USD, 20~30% T/T in progress, harmony towards the copy of BOL. Other payment terms are negotiable. 

Q: Do you provide right after-product sales provider?

A: Our business has a skilled following-product sales services crew, with many a long time of encounter not only on hardfacing items and apps, but also on the operation of software gear. We are able to swiftly remedy customer’s troubles. If there are any high quality problems, the accountable particular person will give realistic remedies inside of twelve hours right after becoming notified.

Mining Feeder Conveyor Heat Wear Resistant Chute



As one of leading leaf-chain manufacturers, suppliers and exporters of mechanical products, We offer leaf-chain and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.